Removing The Microphone; Reinstalling The Microphone - Tait TM8100 Serie Guia Del Usuario

Removing the microphone

1
2
3
4

Reinstalling the microphone

Caution:
To install the microphone:
1
2
3
4
22 Troubleshooting
Using your thumb or forefinger, lift up one
of the corners of the microphone grom-
met. Firmly (but gently) pull that corner
until the seal comes away from the cavity.
Repeat to expose an adjacent corner.
Pull the exposed corners back and slide the grommet up
the microphone cable to reveal the microphone plug.
Remove the plug from the microphone socket.
The microphone grommet must be installed when-
ever the microphone is plugged into the micro-
phone socket. When installed, the grommet has
two functions:
to prevent damage to the microphone socket
when there is movement of the microphone
cord, and
to ensure that the control head is sealed
against water, dust and other environmental
hazards.
Plug the microphone into the microphone socket.
Slide the microphone grommet along the microphone
cord and push two adjacent corners of the grommet into
the microphone socket cavity.
Squeeze the grommet and push the remaining corners
into position.
Check that the grommet is seated correctly in the cavity.
microphone
grommet
control head
grommet