Troubleshooting - Bestway FLOWCLEAR 58271 Manual Del Usuario

Problems
- Sand is too small
- Move the control valve from the backwash to the
Sand is flowing to the pool filter function without stop the sand filter
- The level of the sand is too high
- The skimmer was broken
- Stopper plugs were not removed
- Air was not released
No water flow - The control valve was set to Closed
- The strainer was blocked
- Sand filter broken
- Dirty filter
- Calcified sand bed
Excessive filter pressure
- Insufficient backwashing
- The pressure gauge was broken
Control Valve leaks
- Control Valve was set between two functions
from the port D
- The gasket was broken
- Washer of the connectors not in place
- Washer of the connectors broken
Connectors leaks
- O-ring on the hose connection was broken
- Loose Hoses
Limited BESTWAY
The product you have purchased comes accompanied a limited warranty. Bestway stands behind our
quality guarantee and assures, through a replacement warranty, your product will be free from
manufacturer's defects that result in leaks.
To enact a claim, this warranty card must be filled out completely and returned along with:
1) Your purchase receipt
2) Control valve (P6536) to be sent by post to the address of the after -sales centre
contacted, for details please refer to your country according to the information you find on
the back cover. Before sending the control valve, please contact your after sales center for
instructions.
Bestway is not responsible for economic loss due to water or chemical costs. With the exception of
replacement product, the results of leak are not Bestway responsibility. Bestway will not place any
products deemed to have been neglected or having been used outside of the owner's manual guidelines.
TO: BESTWAY SERVICE DEPARTMENT
DATE
Customer Code Number
FAX/E-MAIL/TEL: Please refer to your country according to the
information you find on the back cover.
Please provide your address details in full. Note: Incomplete address
details will result in delayed shipments.
REQUIRED INFORMATION -- PLEASE WRITE THE
DELIVERY ADDRESS
Name:
Address:
Zipcode:
City:
Country:
Telephone:
Mobile:
E-MAIL:
Fax:

TROUBLESHOOTING

Probable Causes
Manufacturer's Warranty 2014
®
- Recommend 0.45mm to 0.85mm #20 silica sand
- Stop the sand filter every time set the control valve
- Check if the level of the sand is between the marked "MAX" and " MIN" on the
collector hub
- Replace the skimmer
- Remove the stopper plugs and insert the debris screens
- Release the air
- Set to filter function
- Clean the strainer
- Call for service
- Backwash
- Inspect sand and change if necessary
- Backwash until effluent runs clear
- Replace the pressure gauge
- Set to one function
- Replace the gasket
- Reposition the washer
- Replace the washer
- Replace the o-ring
- Tighten them
Select the product you have purchased:
530GAL 800GAL
58271 58126NL
58271GB
58271BE
58271AU
Description of problem
Water leaking
Item is incomplete, Which part is missing - Please
put the code you find on the instruction manual
Others, please describe
For request of spare parts consumer has to send us also the page of
the manual with a cross near the missing or faulty part.
All the information given need to be complete in order
to receive our assistance.
You have to send also a copy of your purchase receipt
together with this fax.
YOU CAN ALSO VISIT OUR WEB SITE:
www.bestway-service.com
7
Solutions
1000GAL 1200GAL
58257
58286
58257GB
58286GB
58257AU
58286BE
58258
58286AU
58257BE
Stopped working
1500GAL
58199
58199GB
58256
58199BE
58199AU
S-S-001558