Hardware Overview; Install The Hardware; Mount The Video Encoder - Axis P7214 Installation Guide

Page 6

Hardware overview

Front view
Mounting holes
LED indicators for
power, status, network
Front view
Dimensions
AXIS P7214

Install the hardware

Important!
The casing of the AXIS P7214 is not approved for outdoor use - the product may only be installed in
indoor environments.
Notes:
• The AXIS P7214 can be placed on a flat surface or mounted. See below for mounting instructions.
• Punch out the protective pads and stick them to the underside of the video encoder to prevent scratches on
the surface where the video encoder is placed.

Mount the video encoder

The video encoder is supplied with a mounting kit containing screws and plugs for mounting the
video encoder on a concrete wall:
1. Place the video encoder against the wall, and mark the four mounting holes (see image on
page 6).
AXIS P7214
microSD memory
card slot
Video input connectors
1 2
IN 1
Audio input 1
Audio input 2
AXIS P7214 Installation Guide
Rear view
Control button
I/O connector
RS485/RS422 connector
3
4
IN 2 OUT 1
Audio output 1
HxWxD = 37x109x172
Weight = 570g (1.26 lbs)
Network connector (PoE)
Power connector