Manual Mode - Klarstein Brauheld Pro 30 Manual De Instrucciones

MANUAL MODE

1
Press the M button once to
switch to Manual mode. The
default setting of Temp, Power
and Time is [0].
4
Press the TIME button once
and set the desired time.
Use the +/- buttons to adjust
the temperature in 1-minute
increments.
7
Press the START button
once. The display will show
[Mashing], indicating that the
unit is operating.
2
Press the TEMP button
once and set the desired
temperature. Use the
(+/-) buttons to adjust
the temperature in 1°C
increments.
5
After you have set all 3
values, press the M button
again. You can program a
maximum of 1 1 steps.
8
Long press STOP button to
stop running and restart. Short
press STOP button to pause
the countdown for sparging
during running.
3
Press the POWER button once
and set the desired power.
Use the (+/-) buttons to adjust
the temperature in 100W
increments.
6
The display will show the set
values.
EN
25