3
Operation
3.1 Preparation
1. Remove all packaging and sticker materials and
dispose of them according to the applicable
legal regulations.
2. Before using the appliance for the first time,
clean all parts which come into contact with
food (see the "Cleaning and Care" section).
3. Before using the appliance, cut the fruits into
halves.
3.2 Operation
1. Remove the lid (8).
2. Put the small cone (2) in to the turning pin.
C
The large cone (1) can be snapped
onto the small cone (2) for serving
large fruit.
3. Place an appropriate size glass under the juice
outlet (3).
4. Push the juice outlet (3) downwards. In this
way, juice fills directly into the glass.
5. Insert the plug into the wall socket.
6. Switch the appliance on by firmly pressing the
halved fruit onto the cones (1) or (2).
7. Pull the juice outlet (3) upwards gently in order
to avoid dripping of juice. Disconnect the plug
from the wall socket.
3.2.1 Hints and tips
• Do not put excessive pressure on the juicing
heads: if the motor starts getting louder or the
speed of the motor decreases significantly,
there is too much pressure being exerted on
the head.
• After each three minutes pressing, let the motor
cool down to room temperature.
• Do not touch the juice container during
operation. Always hold the lower part of the
motor unit when squeezing the fruit.
8 / EN
Citrus Juicer / User Manual