Klarstein 10033689 Manual De Instrucciones página 36

EN
36
Note: Never immerse the pouring spout into the beer glass to avoid much bubble.
Remember to lock the tap after finishing pouring.
1 1. It is normal to have more bubbles when pouring the first 3 cup of beer.
12. There will be a sharp and high-speed jet when pouring the last cup of beer from
keg. Please adjust the CO
supplying and save the CO
Kegs with integrated pressure cartridge
These kegs are pre-charged with CO
to install the CO cartridge. And the knob on the lid does not work.
2
CO connector position
2
1. Remove the adapter that comes with the barrel and then recycle the adapter
according to the relevant regulations of the environmental protection law (see
figure 16).
2. Follow the instructions on the beer keg to install the adapter (the nozzle) (see
figure 17 and 18) supplied with the appliance. Connect the adapter to the tap
connection. The beer connection is now connected (see figure 19).
pressure regulation knob to "-" position to close the CO
2
.
2
, and do not require the use of regulator, no need
2
Figure 15
2