Troubleshooting:
This Steam Cleaner contains no user serviceable parts. Do not try to repair it yourself.
USE TROUBLESHOOTING GUIDE AS A FIRST STEP TO RESOLVE ANY PROBLEMS YOU MAY BE EXPERIENCING.
If steam cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call Customer Service at
1-800-944-9200 for further instruction before continuing use.
PROBLEM
POSSIBLE CAUSE
Steam Mop
1. No voltage in wall plug.
won't run
2. Blown fuse or tripped breaker.
3. Steam cleaner may not be plugged into the
electrical outlet correctly.
4. The electrical outlet may not be working
properly, check the fuse or breaker, or consult
an electrician.
5. The power cord may be damaged.
6. Does not turn on.
Steam mop not
1. Water tank may be empty.
producing steam
2. The water tank may not be attached correctly.
3. Water Filter may be clogged and needs to be
replaced.
4. Thermal protector may turn off pump if trying
to operate steam cleaner before steam
indicator is illuminated.
5. Steam path may be blocked.
Microfiber pad
1. The cleaning pad may already be saturated
doesn't pick up
with dirt and needs washing.
dirt
27
POSSIBLE SOLUTION
1. Check fuse or breaker in home.
2. Replace fuse or reset breaker in home.
3. Ensure the plug is pushed in securely.
4. Check fuse or breaker in home. Replace fuse/reset breaker in
home.
5. If cord is damaged have it replaced by an authorized service
representative.
6. Check the On/Off switch to make sure it is in the On position.
1. Please refer to the "Filling Tanks" section.
2. Please refer to the "Filling Twin Tank" section, and ensure
tank is fully seated.
3. Check Water Filter and clean or replace.
4. Unplug steam cleaner and allow to cool down
5. Please refer to the "Clearing Blockages" section.
1. Wash or replace with clean pad. Please refer to the
"Removing Cleaning Pads" section.
WARNING
!
!
To reduce the risk of personal
injury - Unplug Steam Mop before
servicing and allow to cool.