Setting The Time/Date Automatically - Philips DVDR 80/17 Manual De Instrucciones

Setting the time/date automatically

This function uses the information sent via the local PBS channel to automatically set the
time/date. For this reason, you must enter the PBS channel that sends this additional information.
When the DVD Recorder chooses a wrong PBS channel or the displayed time/date is wrong,
you must manually set the date/time (see section 'Manually setting the time & date').
Attention!
If data from the GUIDE PLus+
this information was taken from the GUIDE Plus+
function.
1
Press SYSTEM-MENU on the remote control. The menu bar
will appear.
2 ' using D or C .
Select ' A
3
Select line 'Installation' using CH- B or ACH+ and confirm
with C .
4 Select line 'Time/Date' using CH- B or ACH+ and confirm
with C .
5
Select 'Automatic' with CH- B or ACH+ and confirm with
C .
a 'Not allowed' will appear on the TV screen
b The time/date will automatically be taken from the EPG information.
Therefore you can not set the time/date manually.
6
Select the corresponding line with CH- B or ACH+ .
7
Select the channel which sends the time/date information in the
line 'PBS Channel' and confirm with OK . The DVD Recorder
will check whether or not the information transfer is possible.
a 'Clock not set, check channel' will appear on the TV screen
b No time/date data can be received from this TV channel.
Select a different channel or 'Auto.' in line 'PBS Channel'.
8
Select one of the following settings in line 'Daylight Saving':
'On': The time set corresponds to summer time (summer time
activated)
'Off': The time set corresponds to the winter time (summer time
is off)
30
® system were loaded, you can not change the clock/date because
® system. Therefore you can not select this
Problem
Time/Date
Automatic
PBS Channel
Daylight Saving
Time Zone
Problem
Installing your DVD Recorder
Auto.
Off
Auto.
To exit press
SYSTEM MENU