Mutsy igo Serie Manual De Instrucciones página 13

ders of the pram body on wear and tear.
· Make sure that the frame has fully been
unfolded and the brake blocked during
all actions indicated below.
Place the pram body (k)
· Place the attachable elements on the
pram body into the attachment points
on the frame and press the pram body
downwards until you hear a click on
both sides.
· Check to ensure that the red sections
on the frame attachment points are
no longer visible. Check that the pram
body has been installed securely by try-
ing to lift it from the frame.
Remove the pram body (l)
· Slide the unlocking buttons upwards
until you hear a click on both sides.
Be careful! The pram body is now un-
locked; the red sections on the frame
attachment points are now visible. Take
the pram body firmly by the handle on
the hood and remove it from the frame
in a vertical movement.
The hood (m)
· The hood can be unfolded by moving it
upwards.
· Push and hold the buttons on the sides
of the hood. The hood can now be fold-
ed downwards.
assemble the rain cover on the pram
body (n)
· Make sure that the hood of the pram
body has been unfolded.
· Place the rain cover from top to bottom
over the pram body and make sure that
the rain cover attaches well all around
the bottom of the pram body.
· Close the Velcro strips around both
sides of the frame.
· Open the zipper in order to remove your
baby from the pram body when using
the rain cover.
The seat
· The seat unit is suitable for children
from birth up to 55 lbs. (25 kg).
! If your child is younger than 6 months
always use the pram body or the fully
reclined position of the seat.
· When in the drive position, the seat can
be folded and unfolded with the frame
and does not therefore need to be re-
moved from the frame.
· The back support and leg support are
adjustable.
· Make sure that the frame has been fully
unfolded and the brake is blocked dur-
ing all actions indicated below.
Moving the seat unit to face forwards (o)
· Place the attachable elements on the
seat into the attachment points on the
frame and press the seat downwards
until you hear a click on both sides.
NB! Place both ridges on the attach-
ment elements into the frame attach-
ment points at the same time.
· Check that the chair has been at-
tached solidly by trying to lift it from
the frame.
Moving the seat unit to face backwards (p)
· In order to place the seat unit so that it
is facing backwards, the attachment el-
ements on the seat need to be turned
by 90 degrees. Press the button (p1),
the attachment elements will unlock
and spring out. Turn the attachment el-
ements to the correct setting and then
click into place.
· Then place the attachable elements on
the seat into the attachment points on
the frame and press the seat down-
wards until you hear a click on both
sides. NB! Place both ridges on the at-
English
7