Installing The Tv To The Wall - Sony BRAVIA KD-85XH95 Serie Guía De Referencia

(Input select):
input source, etc.
(Quick settings):
BACK/
HOME
 +/– (Volume)

(Jump)
 (Mute)* 6
CH +/–//:
Select the channel, or next
() / previous () page.

AUDIO: Select the sound of multilingual
source or dual sound (depend on
programme source).
(Subtitle setting)
HELP: Display the Help menu.
///
 REC:
Record the currently viewed
programme on USB HDD/DVR*
EXIT
 (Power)/+/-


Remote Control sensor / Light sensor /
Illumination LED
3 4

Built-in MIC* *
To enable the built-in MIC, press
button on the remote control and follow the
on-screen instructions.
*1 Light sensor works when used in the dark, and light
up the remote control buttons. The built-in backlight
can be turned off.
*2 RMF-TX611E only. To see the model name of the
remote control, open the remote control cover and
see the label on the remote control.
*3 Only on limited region/country/TV model/
language.
*4 The Google Assistant or voice search requires an
Internet connection.
*5 [TV box setup] setting is required.
*6 Accessibility shortcut is available by pressing and
holding  (Mute).
*7 Standby power consumption will increase because
the built-in MIC is always listening when it is
enabled.
4
GB
Display and select the
Display Quick Settings.
5
.
7
* / LED
(MIC)
For more information, refer to
the Help Guide.

Installing the TV to the Wall

Using the optional Wall-Mount Bracket
(SU-WL450)* (not supplied)
To Customers:
For product protection and safety reasons, Sony
strongly recommends that installation of your
TV be performed by Sony dealers or licensed
contractors. Do not attempt to install it yourself.
To Sony Dealers and Contractors:
Provide full attention to safety during the
installation, periodic maintenance and
examination of this product.
Wall-Mount Bracket Installation Information
This TV's instruction manual only provides the
steps to prepare the TV for Wall-Mount
installation before it is installed on the wall. For
instructions on Wall-Mount Bracket installation,
see the Installation Information (Wall-Mount
Bracket) on the product page for your TV model.
https://www.sony.eu/support
Preparing for Wall-Mount Installation
Make sure to attach the Table-Top Stand before
installing the TV to the wall by referring to the
Setup Guide.
• Prepare the TV for the Wall-Mount Bracket
before making cable connections.
• Follow the instruction guide provided with the
Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV,
especially to determine the strength of the
wall for withstanding the TV's weight.
• Be sure to entrust the attachment of this
product to the wall to Sony dealers or licensed
contractors and pay adequate attention to
safety during the installation. Sony is not liable
for any damage or injury caused by
mishandling or improper installation.
• The screws for Wall-Mount Bracket are not
supplied.
• Only qualified service personnel should carry
out wall-mount installations.