Motor Overload Protection; Grounding Instructions - hilmor 1950536 Instrucciones De Operacion Y Mantenimiento

ENGLISH
ACCESSORIES SAFETY WARNINGS
WARNING:
tested with this product, use of such accessories with this tool could be hazardous.
To reduce the risk of injury, use only hilmor® recommended accessories such as:
WARNING: This machine should only be used for refrigerant recovery into a DOT
certified refrigerant recovery cylinder. Do not recover refrigerant into any other

MOTOR OVERLOAD PROTECTION

The intelligent motor controller prevents motor overload condition. In the case of extreme
over voltage or under voltage the machine will not start. Find working power source.
MOTOR THERMAL PROTECTION
The motor and controller have thermal protection. If the motor overheats for any reason

GROUNDING INSTRUCTIONS

• The hilmor® Recovery Machine must be grounded.
In the event of an electrical short circuit,
grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
The machine is equipped with a cord that has a
grounding wire with a grounding plug. The plug
must be plugged into an outlet that is properly
installed and grounded in accordance with local
WARNING: Improper installation of the grounding plug may result in the
risk of electrical shock. When repair or replacement of the cord or plug is
required, do not connect the grounding wire to either flat blade terminal.
The wire with insulation and an outer surface that is green, with or without
• Check with a qualified electrician or serviceman when the grounding instructions are
not completely understood, or when in doubt as to whether the product is properly
grounded. Do not modify the provided plug; if it does not fit the outlet, have the proper
outlet installed by a qualified electrician.
SAVE THESE INSTRUCTIONS FOR FUTURE USE
8 8
GROUNDED
OUTLET
GROUNDING PIN