General Electric 11270 Manual Del Usuario página 14

Although the GE HD audio receiver can only play music from one device at a time, it is capable of
being paired to up to 8 devices.
After connecting, simply play music on your device as you normally would but enjoy it wirelessly
from your stereo system.
Note: the GE HD Audio Receiver is a Bluetooth Class 2 device with a ~33 feet line of sight range.
However, actual range may vary based on obstructions and conditions in the room.
Powering the GE HD Audio Receiver On and OFF:
Turning the power off on the GE HD Audio Receiver,
is simple just push the top button once then release.
This will turn the receiver off and repeat to turn back on.
Reconnecting your device:
If you move out of range or turn off the Bluetooth feature on your device, the GE HD audio receiver
will disconnect from your device. To reconnect, simply open the Bluetooth settings and choose the
"GE HD Audio Receiver." You will not need to input the PIN again.
Adding a new phone or tablet
If you want to switch from one device to another, please follow these steps:
1. End the existing Bluetooth connection with connected device.
2. The GE HD audio receiver can now be connected with another device that is already connected, or
follow the section "Pairing your GE HD Audio Receiver" to connect a new device.
When out of range or the signal is lost:
When the connected device is away from receiver or the signal obstructed, the LED light will turn off.
To avoid a lost connection:
1. Move your device back into range (within 33 feet), and make sure there's a clear line of sight with
no obstructions.
2. The GE HD Audio Receiver has an "Auto Connect" feature. This allows the devices last pairing with
the receiver to automatically reconnect as soon as the device comes back in range. No need to
repair.
12