Publicidad
Idiomas disponibles
Idiomas disponibles
GB
●Press the "Preset" button again, the minute
portion of preset time flashing digitally, and
press the "+" "-" buttons for adjustment. (The
minute portion of preset time is increased or
decreased in "10 minutes")
The cooking to end at 7:30 tomorrow morning,
prompting music to sound, the Keep Warm
indicator to be bright, and the electric pressure
cooker to automatically enter the Keep Warm state.
For the first use, remove all the accessories from
the cooker body, read the use manual carefully,
and pay particular attention to the use methods
and precautions to avoid damage to your property
or personal injury.
The cooking and cooling time for each function is
different, cooking time varies slightly with the voltage,
amount of food, amount of water, rice quality, water
quality, etc., and when the grid voltage is significantly
lower, the cooking time will increase accordingly;
The greater the amount of cooking, the longer the
cooking and cooling time.
Precautions:
●"Fry" description: This function is for pan frying,
when the pot reach the default temperature, the
time indicator begin to count down, and the ":
" flashing, you can put your food into pot at the
moment, and start cooking. This function is without lid.
23
●No "Preset" function: fry, yoghurt, desserts, cake.
●When cooked without lid, or with glass cover,
cannot be fill to the maximum level, cannot use
"Preset", not be left unattended.
It is not recommended to leave the "Pasta" "Rice"
in "Preset".
DIY may not be desired effect.
When cooked with lid open, the time between the
start and the countdown time default menu is longer
than with the lid closed, the times are not real and
it is not advisable to leave the product unattended.
Cleaning and Maintenance
1. Clean after each use.
2. Before cleaning product, please unplug the power
cord until the product cools.
3. Remove the inner pot after opening the lid correctly,
first clean with detergent, then rinse well with water,
and wipe dry with a soft cloth.
4. Remove the removable coverplate, and rinse with
water. After the cleaning is completed, replace the
removable coverplate, otherwise normal working is
impossible.
5. Remove the exhaust valve and the float valve, rinse
with water, and put them into the original positions.
6. Remove and clean the water storage box, and then
put it into the original position.
7. Check the float valve port and the exhaust valve port
for blockage, and clean the keep warm seat plate with
a reg.
GB
24
Publicidad
