Storage
PREPARATION FOR STORAGE
The following procedures should be followed prior to storage of your
generator for periods of 6 months or longer.
1. Drain fuel from fuel tank carefully by disconnecting the fuel line.
Gasoline left in the fuel tank will eventually deteriorate making
engine starting difficult. Add fuel stabilizer to fuel tank.
2. Remove the drain screw of the carburetor.
3. Change engine oil.
4. Check for loose bolts and screws, tighten them if necessary.
5. Clean generator thoroughly with clean cloth. NEVER USE WATER
TO CLEAN GENERATOR.
6. Pull recoil starter handle until resistance is felt, leaving handle in
that position.
7. Store generator in a well ventilated, low humidity area.
Generator Specifications
Engine Model
Start
Rated Frequency
Rated Voltage
Rated Power
Fuel Tank Capacity
Full Load Continuum Running Time
50% Load Continuum Running Time
Noise (7m)
Specifications for the Panel
Certification
LOW THD
Wheels & Kits
26
STORAGE
R210
Manual
60Hz
120V
2.8KW
15L
7h
10h
72dB
2 x GFCI Duplex with water
proof cover, 1 x 120V- 30A
Twist lock-3 prongs with
water proof cover, Low oil
indicator
CSA/EPA/CARB
N/A
Yes