Control Panel - mundoclima MUPO-H8 Manual De Instalación Y Usuario

Control Panel

There are two kinds about control panel, Fig A and Fig B, the actual shape shall prevail.
FigA
7
8 6
FigB
SWING TIMER SLEEP
7
8 6
TEMP. indicator
* In cooling or heating mode, when
displayed and be adjusted.
*1.In auto, cool and heat mode, TEMP.indicator display is setting temperature.
2.In dry and fan mode, TEMP.indicator display is room temperature.
Function buttons
1. / button
2. button
a. The running time of the unit has reached 250 hours, the filter reset indicator light will
illuminates, and it means the air filter should be cleaned.
After cleaning, you can press the "
turns off and the running time will be cleared.
b. If you do not press the "
illuminates, the indicator light will always illuminates except the unit is power off.
3. button
/
The fan speed indicator light illuminates under the different fan speed.
Note: In fan mode,do not have auto fan speed;
5
AUTO
MODE
5
or
Press this button to make the unit run or stop.
" button when the filter reset indicator light
Press this button, you can select the fan speed as follows:
auto hi
TEMP. indicator
-
+
4
TEMP. indicator
-
+
4
button is pressed, the setting temperature is
" button, the filter reset indicator light will
med low
42
3 2
AUTO
FILTER
FAN SPEED
RESET
3 2
1
1