Function Buttons - DALKYO MB-11 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 1
>>
español
english
française portuguese
>>
español
english
français portuguese deutsch italiano
seal on the grinder base and firmly fix to
the glass jar. Fix the grinder on to the top
of the motor base. Coffee beans may now
be ground as normal.
8.
To use the "SMOOTHIE", "ICE" or
"PULSE" functions turn the selector switch
to the "ON" position and press one of the
buttons. The button will light up indicating
that the function is operating.
9.
To select the speed, turn the selector
switch between the "MIN" (low power
speed) and "MAX" (high power speed)
positions in order to achieve the required
speed.
10. Use the appliance for a maximum of 1
minute continuously and wait for 1 minute
before using again.

FUNCTION BUTTONS

1.
SMOOTHIE
The blade turns at high speed, suitable for
smooth blending.
2.
ICE
The blade turns at high speed; it operates
for 1 second and shuts off for 0.5 seconds,
perfect for crushing ice.
3.
PULSE
The unit operates only when the pulse
button is pressed and it shuts off once the
button is released. The blade turns at high
speed.
4.
MIN
The blade turns at low speed.
5.
MAX
The blade turns at high speed.
6.
ON
The unit is switched on and the "BATIDO /
SMOOTHIE", "HIELO / ICE" and "PULSE"
functions can be used.
7.
OFF
The unit is switched off.
SPEED SETTINGS
Low: for low-power use with liquids.
High: for a more solid consistency- for
blending liquids and solid foods.
Pulse: to soften ice-cream; short, powerful
pulse movements.
(The selector switch does not remain in the
"Pulse" position when released.
USEFUL TIPS
-
For the best results when blending solid
ingredients, place small portions in the
glass jug a little at a time instead of putting
a large quantity all at once.
-
If you are blending solid ingredients, cut
them first into small portions (2-3cm).
-
When blending solid ingredients, start by
>>
14
>>
14
adding a small quantity of liquid. Gradually
add further quantities of liquid through the
lid opening.
-
Always hold the blender top steady with
your hand while the appliance is operating.
-
Proceed carefully when blending think
liquids.
-
To blend solid ingredients or very thick
liquids we recommend you use the "Pulse"
setting to prevent the blades from sticking.
-
To crush ice easily it is advisable to add a
small quantity of water.
CAUTION
If the glass jug is filled too much the blades
may not spin freely thus preventing the
blending cycles from operating correctly.
If this happens, switch off the unit and
unplug from the socket. Empty some of the
contents and then switch on again.
CLEANING AND STORAGE
Warning: Switch off the unit before
cleaning to prevent electric shocks and
other hazards.
1.
In addition to this, you should read
the "Safety precautions" section at the
beginning of these instructions.
2.
Do not clean the motor base, the power
cord or the plug with water.
3.
Clean the motor base with a soft, damp
cloth and wash with a mild detergent.
4.
Half-fill the jug with hot water and a small
amount of washing liquid. Leave the unit to
operate at maximum speed until the jug is
clean (maximum 1 minute).
5.
The jug base can be separated from the
jug itself. Unscrew in a counter-clockwise
direction and remove the blade assembly
together with the rubber seal.
6.
Clean the grinder by half-filling the jug with
hot water and a little washing liquid; fix the
grinder on to the top of the motor base.
Leave the unit to operate at maximum
speed until clean. Then use the water to
clean all grinder components. (maximum 1
minute).
7.
Dry all components well before using
again.
Caution: The blades are very sharp.
Handle with care when cleaning.
8.
Never use abrasive detergents.
SPECIFICATION
Modelo: MB-11
Tensión / Frecuencia:
220-240V ~ 50/60Hz
Consumo de energía: 700W
Capacidad: 1.5 L

Publicidad

Tabla de contenido
loading

Tabla de contenido