Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
FAN MODE
In this mode, the air conditioner simply circulates the air without cooling it.
Install the exhaust hose (See Page14), turn the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered with the stopcock.
VENTILATION MODE
In this mode, the air conditioner ventilates the air to outdoors.
Install the exhaust hose (See Page 14), turn the drainage nozzle to the CLOSE position,
and check the drainage nozzle is covered with the stopcock.
1
Press the MODE button to select FAN mode.
COOL DEHUM
2
2
Press the POWER button to start operation.
• The red OPERATION lamp on the unit will light.
• The temperature cannot be set.
3
Press the FAN button to set the desired fan
speed.
1
QUIET
3
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.
1
Press the MODE button to select VENT mode.
COOL DEHUM
2
2
Press the POWER button to start operation.
• The red OPERATION lamp on the unit will light.
• The temperature cannot be set.
3
Press the FAN button to set the desired fan
speed.
1
• Although the louvers are closed and no air blows
out into the room, the external ventilation fan
3
speed changes.
QUIET
TO TURN OFF
Press the POWER button again.
• The red OPERATION lamp on the unit will turn off.
E-20
FAN
VENT
LOW
HIGH
FAN
VENT
LOW
HIGH
Publicidad
Capítulos
Tabla de contenido
