D-Link DIR-879 Guía De Instalación Rápida página 4

PRODUCT SETUP
RouteR MoDe HARDWARe SetuP
Step 1
Router Modem
Position your DIR-879 near your Internet-connected modem. Keep
the router in an open area for better wireless coverage.
Step 2
Router
Fully extend the antennas to provide optimal wireless coverage.
Step 3
Inspect the mode switch button to ensure that it is in the factory
default ROUTER position. Adjust the switch if necessary.
Router
Step 4
Router Modem
Turn off or unplug your modem. Use the included Ethernet cable to
connect your modem to the port labeled INTERNET on the router.
Turn on or plug your modem back in and wait approximately one
minute before proceeding onward.
Step 5
Router Modem
Connect the supplied power adapter to the router and a power
outlet, press the power button, and wait approximately one minute
until the LED indicator on the front of the device changes from
orange to solid white.
Step 6
PC
PC Modem
If you are configuring the DIR-879 wirelessly from a PC, connect to
a Wi-Fi network printed on the included Wi-Fi Configuration Card.
You can also find the Wi-Fi network names and passwords printed
on the label attached to the bottom your router.
Router
If you are configuring the DIR-879 from a PC with a wired Ethernet
connection, plug one end of an Ethernet cable into the port labeled
1 on the back of the router, and the other end into the Ethernet port
on your computer.
2
DiR-879