Agri-Fab 45-04622 Manual De Instrucciones página 7

K
N
N A
5
Z
5
5
13
Q
14
15
ENGLISH
Calibrate the flow control setting. (See figure 17)
•
•
•
•
•
•
N
I
7
R
L
S
F
"5"
Move the control lever to the "OFF" position.
Slide the control bracket along the control tube until the
shut-off plate in the bottom of the hopper is closed.
Lightly tighten the hex nuts that fasten the flow control
bracket to the control tube.
Set the adjustable stop at "5". Pull the control lever against
the stop and verify that the shut-off plate has opened about
half way.
If the shut-off plate does not open half way, adjust the
position of the control bracket until the shut-off plate opens
about half way and closes completely.
Tighten the hex nuts.
16
Y
Q
17