6. First steps
6.1. Switching on the camera
Press the ON/OFF button for 1 to 2 seconds to turn the cam-
era on.
The ON indicator LED turns red for a moment and the display
comes on. The camera is then in operating mode.
PLEASE NOTE!
If the camera does not switch on, check whether the
batteries are inserted properly and whether or not they
are charged.
6.2. Switching off the camera
Press the ON/OFF button down for a little longer to switch
the camera off.
6.2.1.
Energy-saving mode
If the camera is not used for 60 seconds, it switches off. You can
also set the automatic switch-off time to 3 minutes or to switch
off completely.
29 of 66