Unpacking The Product - XYZ Printing da Vinci Jr. WiFi Pro Manual Del Usuario

Unpacking the Product

1
Open the box and then remove
the accessories and cushions.
Remove all fixing tapes and the
3
cushion between print bed and
extruder module.
6 Be sure to remove the fixing tapes
at the back of the print bed.
Insert the SD card that came with the printer into your
9
computer or download the latest XYZmaker Suite from the
official Website and install it on the computer.
Please use the original power adapter and power cord along with the printer in order to prevent
product damage or safety hazards caused by differences in voltage specifications.
Unpacking the Product
HD23FJPW1A7
da Vinci
Be sure to remove the fixing
4
cushion from the axis.
7 Be sure to remove the paper
cardboard near the Y-axis.
2
Remove the plastic bag and the tape.
5
8
Use the USB cable to connect the printer to PC. Connect
10
the power cord to the printer then turn on the power
switch.
da Vinci
Jr. WiFi Pro
Remove the securing styrofoam
and fixing tapes on the print bed.
Please removal all fixed materials
before turning on the printer to
prevent the machine from damage.
P 4