CLEANING THE DRAIN PUMP
If the dishwasher fails to drain because the drain pump is
clogged with foreign matter or there is an abnormal noise
coming from the drain pump, you must unclog and clean
the drain pump as instructed below.
1. Remove the lower rack.
2. See the "Cleaning the fi lter" section to remove the
cylindrical micro fi lter.
3. Remove any moisture from the fi lter using a sponge.
4. Remove the drain-pump cover by pushing its handle
in the arrow direction (1), and then pulling up (2).
5. Check the impeller to see if it's in good condition.
Then, remove any foreign matter from the pump.
6. Reinsert the drain-pump cover into place, and then
press down until you hear a clicking sound.
STORING YOUR DISHWASHER
If you need to store your dishwasher for an extended period of time, fi rst drain and disconnect it. If you leave
water in the hoses and internal components, you can damage the dishwasher.
After draining and disconnecting the dishwasher, be sure to turn off the water supply valve and circuit
breaker.
DW9900M-00184A-00_EN.indd 29
DW9900M-00184A-00_EN.indd 29
1
English - 29
2
2016-12-12
2016-12-12
2:47:57
2:47:57