Using The Live Drive App; Downloading The App; Bluetooth Pairing; Live Drive Operation - Alto Professional BLACK 18sub Guia Del Usuario

Using the Live Drive App

Black Series subwoofers also come equipped with wireless technology and the unmatched
capabilities of the Alto Professional Live Drive app. You'll be able to level-match, adjust EQ and
compression, time-align and more. The Black Series puts active live sound control at your
fingertips. Using the app on your iPad or iPhone, you can adapt the subwoofers to new venues
or tweak settings remotely from any corner of the room. Black Series subwoofers offer a
powerful new experience, not only for your audiences, but also for you—you get streamlined,
sound-shaping capabilities at your fingertips.

Downloading the App

To download the App, just search for Live Drive in the App Store and download the Alto
Professional Live Drive app.

Bluetooth Pairing

About Range: Black Series subwoofers use an advanced, extended-range Bluetooth antenna
design, allowing for ranges far greater than traditional Bluetooth devices. The typical range is
approximately 100 feet (30 meters) with a clear line of sight. However, the range may vary
depending on your source device and the environment.
To maximize the range:
•
Set your source device on a flat surface and make sure there are no obstacles between
the subwoofer and your device (e.g., walls, furniture, etc.).
•
Turn off your source device's Wi-Fi.
•
Turn off any unneeded 2.4 GHz devices in the nearby vicinity (e.g., other Bluetooth
devices, baby monitors, Wi-Fi access points, microwave ovens, etc.).
•
Try using a different Bluetooth source device (iPad or iPhone). Bluetooth signal strength
varies between different devices.
To pair the speaker to your Bluetooth device:
1. Do this on one subwoofer only: With the subwoofer powered on, press and release its
Pairing Button. Its Pairing LED will flash.
2. From your Bluetooth device's settings page, enable Bluetooth and select Black Series as
the device. When paired successfully, the Pairing LED will light continuously. (This
process may take up to 30 seconds.)
Important: If your device prompts you to enter a PIN code to pair it to the speaker, enter
0000 (four zeros).
3. Once your device is paired to the subwoofer, the subwoofer will remember the device
even after power-cycling it. If the device does not reconnect automatically, go to your
device's Bluetooth settings page and select Connect to reestablish the connection.
To erase all previous pairing settings, press and hold the Pairing Button for 10 seconds. The
LED will flash to confirm the pairing records are erased. Now, you can pair to a new device.

Live Drive Operation

For more information about using Live Drive, visit altoprofessional.com/livedrive.
6