Indications For Use - Maxtec Bird R219P17 Manual Del Usuario

DESCRIPTION
The Blender Buddy is a manifold accessory designed to be attached to an outlet port
of the Bird ® air/oxygen blender. From the blender outlet port, the air/oxygen mixture
passes into a primary or a primary and a secondary channel within the Blender Buddy
manifold. The primary channel is used to deliver the gas to a set of flowmeters which
meter the gas flow by means control valves. The secondary channel is a small channel
that empties into a cavity (port) sized to receive a galvanic oxygen sensor; this port fits
the Maxtec line of oxygen analyzers and is used to analyze oxygen concentration of the
air/oxygen mixture to be delivered to a patient. The Blender Buddy can be configured
with various sized color coded flowmeters for customized flow rate delivery to patients.
Flowmeters are sold separately.

INDICATIONS FOR USE

The Blender Buddy is intended for use in conjunction with a Bird
Then Blender Buddy allows the operator of a blender to supply a mixed gas through a
set of flowmeters. Blender Buddies designed with bleeds include an extra analyzer port
for analyzing the oxygen concentration of the air/oxygen mixture being delivered to a
patient.
WARNINGS
DO NOT use substitute parts
DO NOT use lubricants on o-rings.
» Not for use in MRI Environments.
» Carefully read instructions provided with flow meters, as well as this insert, before use.
» For use with air/oxygen blenders only.
» Max pressure is 100 psi.
» Check for leaks and proper function before using on a patient.
» Maxtec assumes no responsibility for any damage or injury caused by improper
installation, assembly or use of this product.
» Replace EPDM o-rings during recommended blender rebuild. Use Maxtec approved o-rings.
» This product should only be used under proper supervision of a healthcare professional.
» If components are damaged or missing, contact your dealer immediately.
» Clean often using a cloth moistened with 65% isopropyl alcohol/water solution or
germicidal wipe.
» Follow all recommendations provided in the manual for the connected blender.
WARRANTY
» 2-year limited warranty on manufacturing defects.
!
866.4.Maxtec www.maxtec.com
air/oxygen blender.
®
3