What
to avoid
First clean-
• gently remove the protec ve lm, eliminate glue residues with suitable solvents
• carry out the rst cleaning using neutral products, dry with a so cloth
ing
CAUTION! Discarded packing parts. Injury.
Do not leave packing parts (nails, wood, staples, etc.) and tools used for the opera on (pliers,
scissors, etc.) in the working area.
These objects must be removed with appropriate means and taken to their respec ve col-
lec on places.
i
For correct disposal, the package consists of:
Wood - Polystyrene - Polythene - PVC - Cardboard.
14. Wiring
DANGER! Live parts. Electrocu on.
REMOVE THE ELECTRIC POWER SUPPLY BEFORE ANY OPERATION!
ensure that the casing does not come into contact with the electrical panel
Provide a suitable grounding system!
i
The systems must be set up in accordance to the norms that regulate manufacture, installa-
on, use, and maintenance foreseen by the norms in force in the country where the cabinet
is installed.
To ensure normal opera on, the maximum varia on of the voltage must range between +/-
6% of the nominal value.
Liability
Customer
Installer
ARNEG
05060161 00 08-04-2015
DO NOT install the cabinet (Fig.4):
- in areas at risk of explosion
- in open air and therefore subjected to atmospheric agents;
- near heat sources (direct sunlight, hea ng systems, incandescence lamps,
- in the vicinity of air currents (close to doors, windows, air-condi oning sy-
stems, etc.) that exceed a speed of 0.2 m/s
DO NOT use alcohol to clean the methacrylate (Plexiglas) parts
DO NOT use abrasives or metal sponges
provide a power line to the cabinet connec on point.
provide the anchoring devices for all the wires in input and output
to/from the cabinet.
ARNEG S.p.A. denies all liability with respect to the user or third
par es for:
- damages caused by failures or malfunc on of the systems instal-
led upstream of the cabinet
- damages to the cabinet due to causes arising directly from mal-
func on of the electrical system
Velden
English
etc.)
37