Cleaning Maintenance And Storage - ALFA living DOLCE VITA TOP Manual De Usuario

CLEANING MAINTENANCE AND STORAGE

- Switch off the gas fired oven and wait it to cool down before cleaning.
- To clean the oven don't use traditional oven detergents,abrasive detergents, (kitchen detergents) or detergents
containing citrus extracts, nor use abrasive steel woll.
- The gas burner must be cleaned periodically, and remove any food residue.
- Make sure to not damage the valves and the burners during cleaning.
Thermometer - Clean with warm water, soap and a soft cloth.
Oven - Remove any residual food from the burner with a brush. Do not enlarge burner orifices.
Stainless steel surfaces - Wash with a soft cloth and soapy water. Pay attention to follow the grain of the stainless
steel. Do not use detersives with acids, turpentine or xylene. Rinse well after cleaning. Making the steel shine is
very easy. Just wash it with soapy water, rinse out with water and dry properly. In case of resistant residuals, you
can use a non-metal brush.
EN
HOW TO MAINTAIN UNALTERED THE STAINLESS STEEL
Making the steel shine is very easy. Just wash it with water and soap, rinse out with water and dry properly. In
case of resistant residuals, it is possible use a non metal brush.
COLD SEASON
We suggest to store the oven during the cold season in an enclosed dry area to protect it from weathering. Before
storage, lightly lubricate the metal parts with Vaseline oil in order to avoid corrosion. After storage, please check
for any malfunction.
GAS BURNER DISASSEMBLY AND CLEANING
The gas burner should be cleaned periodically by carefully sucking up any cooking residues.
When cleaning valves and burners, be careful not to damage the burner.
Before cleaning is necessary to remove the burner from the oven by running the following procedure:
1. Remove the knob (a).
2. Unscrew the screw (b).
3. Remove the cover (c) by unscrewing the 2 screws.
4. Remove the gas box
5. Disconnect the two cables piezoelectric ignition. If necessary, remove the protective casing unscrewing the
screw (f), and then remove the burner.
To replace the burner just perform the procedure in reverse.
18
(d) to discover the connection of the cable piezoelectric ignition (e).
FRONT BACK