Probuilder 32231 Manual De Instrucciones página 10

SAW HORSE
Sawhorse for creating a sturdy jobsite table with material support legs, fast-open/close legs,
easy carry handle, and 2 selectable height positions.
Maximal permissible load = 500 kg
Product dimensions unfolded: 101,5 x 67,5 x 73 cm
Product dimension closed: 101,5 x 10,3 x 12 cm
1 1
Press button, extend the � rst Press button, extend the � rst
legs, and support legs with legs, and support legs with
the other hand. the other hand.
4 4
Fold out the material support Fold out the material support
brackets to hold material. brackets to hold material.
6 6
Create a solid jobsite table with 2 or more Create a solid jobsite table with 2 or more
sawhorses. Insert two standard lengths of sawhorses. Insert two standard lengths of
wood into the slots spanning the sawhorses. wood into the slots spanning the sawhorses.
Make sure the sawhorses are on a � at, stable
surface.
10
2 2
Push down leg brace till it is Push down leg brace till it is
fully locked out. Make sure fully locked out. Make sure
that the top of the legs lock that the top of the legs lock
solidly against the body.
5 5
Mount the timber holder kit to position 1 Mount the timber holder kit to position 1
or position 2, and tighten the bolts. or position 2, and tighten the bolts.
Position 2
7 7
Place a sheet of plywood across the lengths Place a sheet of plywood across the lengths
of wood and sawhorses making sure the of wood and sawhorses making sure the
plywood is fully supported on all sides. plywood is fully supported on all sides.
Fasten with wood screws if necessary.
3 3
Repeat step 1 and 2 to fold Repeat step 1 and 2 to fold
down the second legs. down the second legs.
Position 1