IntesisHome PA-AW-WIFI-1 Guida Rapida página 6

®
IntesisHome PA-AW-WIFI-1
5. LED status information
All diff erent LED statuses are summarized in the LED status table. In order to know the current state of the
device, please check the table below.
LED Color (s)
Blue
Green
Green
Red
Yellow
Red /Green
Yellow /Green
Proper LED sequence during confi guration process is as follows:
Green
Steady
Ready
Estimated time in one status and transition time from one status to another may vary. Please wait for the
complete sequence to fi nish.
If your device is not following this sequence and does not work properly, please visit our support site at
www.intesishome.com/support.
6. Changes in your Wi-Fi network
If you change your Wi-Fi network password, SSID (network name), your Access Point or router, your
IntesisHome ® needs to be reconfi gured.
To do it so, press the IntesisHome
device LED will start blinking Green and then will change to steady Green. Go to section 4 to re-start the
confi guration process.
7. FAQ and support
For any question or problem related with the product or the installation procedure, please visit our support
site at www.intesishome.com/support.
6
Behavior
Blinking Performing WPS connection
Steady Ready to be connected
Blinking Checking device confi guration parameter values
Blinking Connecting to access point and server
Blinking Downloading confi guration. Wait
Alternate Error Connecting to Access point or router. Try to connect
blinking again and make sure you write the correct password
Alternate Server not reached. Check if there is Internet connectivity on
blinking your Access Point or router
Green
Blinking Blinking
Checking Confi guring
® device button during 10 seconds. Once the button is released, the
USER'S QUICK START GUIDE
Description
Yellow
Blinking
Connecting
Red
Off
Connected &
working