Wolf DD30 Manual Del Usuario página 11

IN S TA L L AT I O N
Installation
IN -LINE / R E MO TE B L O W E R
Insert the electrical supply (Romex) from the in-line or
1
remote blower through the opening on the downdraft
and secure using an approved cord strain relief.
Connect hot to brown, neutral to blue, and ground to
2
green. Refer to the illustrations below.
WIRING
COVER
Wiring location
FROM
BLOWER NEUTRAL
HOT
POWER
GROUND CORD
BLUE
BROWN
In-line/remote blower wiring
C OU N T ERT OP MO U N TI N G
Place the downdraft in the opening, then secure the bottom
brackets to the cabinet base using the wood screws pro-
vided. Once the brackets are secure, tighten the existing
lower bracket screws. Refer to the illustration below.
Secure the top mounting brackets to the countertop using
the wood screws provided. For solid surface countertops,
silicone may be used but is not provided.
Once the top is secure, install the undercounter brackets
using the screws provided, then install the side covers.
Refer to the illustration below.
MOUNTING
SCREW
Countertop mounting
COVER
Cover installation
wolfappliance.com | 11