NOTE Products should be sold in their original packaging. When this is not the case, the retailer
or/and the installer is obliged to follow, as well as communicate to the user, the instructions for use
which are supplied with the product. After opening the packaging, check that the appliance is undama-
ged. Do not use the appliance if there is any doubt, but contact a qualified technician. Even before
unpacking, the appliance should be handled with care and stored in a dry place at temperatures
between –5°C and +40°C.
Also note:
• Installation must be carried out by qualified technicians.
• Before carrying out any maintenance on the appliance, cut off the mains power.
• Special care should be taken in the preparation of the cable terminals to be inserted into the applian-
ce terminals so as to maintain sufficient isolation distance between them. Use 1.5 mm
• When tightening the terminal screws, special care should be taken to avoid overheating which could
start a fire or damage the cables.
• The product must be used in dry, dust-free areas. Suitable products must be used in any other condi-
tions.
• There is the possibility of electric shocks or failure of the device if the device is tampered with.
• Install products and accessories according to the standards in force for electrical systems.
THE PRODUCT SHOULD BE USED FOR ITS INTENDED PURPOSE AND ACCORDING TO THE
INSTALLATION STANDARDS AND HEREWITH ENCLOSED USER INSTRUCTIONS
2
section wires.
29