Features; Instrument Layout - KYORITSU 4118A Manual De Instrucciones

3. FEATURES

3.1 Instrument Layout

LCD
1............ LCD display
2............ Wiring check LEDs
3............ Test button
4............ Range switch
5............ Connector
#
DANGER
● Use original test lead only.
● Max. allowed voltage between mains test terminals and ground is
300V.
● This instrument is intended only for use in single phase operation
at 230V +10% -15% AC phase to earth or for use in OLD-TT
system phase to neutral.
③
⑤
① ②
Fig. 3
— 5 —
Wiring correct
（Green LED's）
Reversed L/N terminals
（Red LED）
④
Connector