Alarm Set Menu - Sony YS-DX316P Manual De Instrucciones

ALARM SET Menu

Setting
1
Press the MENU button, then press the SHIFT v
button to select "3. ALARM SET".
2
Press the MENU button.
3
Press the DATA + (or –) button to select the
desired setting for "BUZZER", then press the
SHIFT v button. Following the same procedure,
select the desired settings for "DURATION",
"RETRIGGER", "MONITOR1 ZOOM",
"MONITOR1 STILL", and "MONITOR2 OUT".
For more details on each setting, see "Alarm Settings"
below.
4
Press the MENU button, then press the SHIFT v
button to select "7. EXIT" and press the MENU
button again.
14
(EN)
Alarm Settings
BUZZER
ON: The buzzer will sound when there is an alarm
trigger.
OFF: The buzzer will not sound.
DURATION
10SEC, 20SEC, 30SEC, 40SEC, 50SEC, 60SEC:
Duration of the alarm.
CC: The alarm will go on as long as the alarm signal
is received (minimum 10 seconds).
RETRIGGER
ON: If a second alarm trigger is received during the
alarm operations for that same alarm number, then
it will also be received. The alarm operation is
extended.
OFF: During the alarm operations for an alarm
number, any alarm trigger at the same alarm
number will be ignored.
MONITOR1 ZOOM
ON: When an alarm trigger is received, the image
displayed on monitor 1 will zoom in (live only).
OFF: The zoom function will not operate.
MONITOR1 STILL
ON: When an alarm trigger is received, the image
displayed on monitor 1 will freeze (live only).
OFF: The still function will not operate.
MONITOR2 OUT
ON: When an alarm trigger is received, the image
from the camera corresponding to the alarm
trigger is displayed on monitor 2.
When 2 or more alarm triggers are received
simultaneously, monitor 2 will display
sequentially all the images from the cameras
corresponding to the alarm triggers.
OFF: The monitor 2 output function will not operate.
VIDEO LOSS
ON: If there is no camera input signal, the Monitor 1
screen will split into a 16-division split screen and
an alarm will be output for 30 seconds. A screen
without input will show a flashing "A". Even if a
signal is input within 30 seconds, the alarm will
still be output for 30 seconds.
OFF: No alarm