Mi-T-M GEN-13000-1MSE Manual Del Usuario página 24

MAINTENANCE
EVAPORATIVE EMISSION COMPONENTS:
The unit you have purchased includes the following
components that are in compliance with California Air
Resources Board Evaporative Emission Standards;
1. Fuel Hose
2. Fuel Hose Fittings
3. Fuel Tank and Cap
4. Carbon Canister and Mounting Brackets
These components should be inspected on a daily basis
for cracks, leaks, and abnormal wear. If cracking, leaks
or abnormal wear has occurred, the components should
be replaced immediately.
IDLE CONTROL ADJUSTMENT:
NOTE: The automatic idle speed is set between 2550
and 2950 RPM.
The idle speed has been pre-set at the factory and should
rarely require readjustment. We recommend that all
adjustments of this nature be made by a Mi-T-M Customer
Service Representative.
Erratic idle operation of the engine usually indicates a
need for carburetor adjustment to provide a smooth idle.
The idle control will not function properly when the idle
speed is below the recommended limits or the carburetor
is improperly adjusted.
HAVE THE UNIT SERVICED BY AN AUTHORIZED
MI-T-M CUSTOMER SERVICE
REPRESENTATIVE.
24
Service
Operator's Manual