LEGRAND Wiremold OFR Serie Instrucciones De Instalación página 4

6. ttach device box cover using (4)
#8-32 round head screws.
If raceway is to extend beyond the device box, follow the following steps
for altering the device box to accept a second section of raceway.
7. Remove base extension from base.
This part is no longer needed.
9. Remove breakaway tab on end of cover. First
break corners as shown in 9 . Second twist the
center of the tab 9B until it breaks free.
9
9B
9
8. Remove breakaway tab on end of divider.
10. Complete installation using steps 1 trough 6.
4