Waldbeck Yukon Manual De Instrucciones página 47

EN
accurate, while in the mineralization or salinization soil, the discrimination
indication will have various degree of deviation.
The above identification is only a reference, not completely accurate.
The depth indication is accurate for coin-sized objects. Large objects or
irregularly-shaped objects will yield less reliable depth readings. If sweeping at
the same place for several times, but shows the same depth, then it is a more
accurate detection. If the depth indication varies, try to change the angle of
sweeping. There may be more than one target present.
Remind you once again, when detecting in the wild, due to the impact of the
ground condition, the discrimination indication and depth indication will be
all deviation. The composition, size and oxidation of the metals will all affect
the indication result. It is necessary for you to consider these factors before
choosing elimination a certain metal or determining whether there are
precious metals present. Not to eliminate the precious metals.
8. The use of the non-motion mode
In fact, the sensitivity in the non-motion mode is high, search metals directly
using non-motion mode is also a choice.In some regions, the ground is too
narrow to sweep search coil, you could choose the PINPOINT mode. In the
severe mineralization or salinization region, you could try to sweep using
PINPOINT directly.
47