For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
E14
OPERATING MANUAL
10 DAILY MAINTENANCE
10.1 Cleaning the recovery tank
Always wear gloves when doing this to protect yourself from Q contact with hazardous solutions.
1. Remove the protection cover after taking off the the black plastic hoses.
2. Remove and carefully rinse the filter and the float (Fig. 11)
3. Lift the recovery tank, rotate it anti-clockwise and take it off (Fig. 12)
4. Rinse the recovery tank (Fig. 13), carefully rinse it and clean the drain plug.
5. Replace everything by carrying out these procedures in reverse order.
For the discharge of the liquids used for the floor cleaning, follow the indication written on the soap label and
applicate the currently laws and codes.
10.2 Cleaning the squeegee
Clean the squeegee with a jet of water. Check the condition of the rubbers and reverse or replace them as necessary.
Careful cleaning of the entire aspiration unit ensures a longer working life for the vacuum motor.
Clean the wiper tube and make sure it is not clogged (Fig. 10 - 2).
10.3 Cleaning the solution tank filter
1. Remove and clean the filter (Fig. 7 - 1).
2. Replace the filter.
10.4 Removing the disk brushes
1. Lift up squeegee moving upward its lever (Fig. 8 - 3)
2. Lift up the machine levering with the handle
3. Activate with pulses the start button (Fig. 8- 2)
The brush lock out automatically.
Make sure there are no objects or people close to the machine.
For cleaning machines, parts & supplies click/visit www.southeasternequipment.net
V03
MINUTEMAN INTERNATIONAL INC.
14N845 U.S. Route 20
Pingree Grove, Illinois 60140
www.minutemanintl.com
19