Location; Wiring; Jp2 Configuration Jumper; Final Adjustements - golmar AS-220S Manual De Instalación

DOOR PANEL INSTALLATION
1 user
2 user s
D
oor panel wiring.
Connect the installation wires to the terminal connector,
according to the installation diagrams.
c
onfiguration jumper 'JP2'.
The JP2 jumper is placed on the low left side of the door panel
and it allows to select if the system is for 1 or 2 apartments.
System call to 1 apartment.
JP2
System call to 2 apartments.
JP2
Call push button (1 apartment):
1 user
2 users
Face the door panel to the wall by placing the top at 1,65m.
height and insert the installation wires through the cables
entry.
Drill two holes of 6mm. diameter and insert the wallplugs.
Fix the door panel with especified screws.
Call to apartment 1.
Call to apartment 1.
Call push button (2 apartments):
1 2 Call to apartment 1.
1 2 Call to apartment 2.
If after starting the system it´s considered that the
audio volume isn t correct, proceed with the
'
necessary adjustments as shown on the picture.
P
lace the door panel.
JP2
*Factory default
F
inal adjustments.
33