TROUBLESHOOTING
CHART
PROBLEM
CAUSE
CORRECTION
Grass catcher
1. Cutting height too low.
1. Raise cutting height.
notfilling(ifso
2. Lift on blade worn off.
2. Replace blade.
equipped)
3. Catcher not venting air.
3. Clean grass catcher.
Hard to push
1. Raise cutting height.
1. Grass is too high or wheel
height is too low.
2. Rear of lawn mower
housing or cutting blade
dragging in grass.
3. Grass catcher too full.
4. Handle height position not
right for you.
2. Raise rear of lawn mower
housing one (1) setting
higher.
3. Empty grass catcher.
4. Adjust handle height to
suit.
18