Electrical Connection - Fagor FA-5812 X Manual De Instruciones Y Mantenimiento

LEVELING THE WASHING MACHINE AND CONNECTING
3
TO THE POWER SYSTEM
LEVELING THE MACHINE
a We recommend seating and
leveling the back first. Once these
are well seated, firmly fix the metal
locknut to the top section.
b Place the washing machine in the
recess. A wet floor may help you
drag the machine to its definitive
location.
c Level and fix the front feet in the
same manner as the back feet.
Be sure to keep the supplied
wrench, you might need it again.

ELECTRICAL CONNECTION

Before making any electrical connections, refer
to the data indicated on the specifications
label attached to the machine's door. Make
sure that the voltage supplied to the plug's
base is the one indicated on the label.
Do not remove the specifications label, as the
information on it is important.
The washing machine must be connected
to a properly grounded power outlet.
The electrical installation, plug, outlet, fuses,
or automatic switch and counter must be
adjusted to the maximum power indicated
on the specifications label.
Do not insert the machine's plug into the
outlet with wet or moist hands.
To remove the cable from the outlet, pull
out the pin body, do not pull from the cable.
installation and setup
If the power supply cable is damaged, it
must be replaced with a special cable or
assembly supplied by the manufacturer or
after-sales service department.
On recessed washing machines, the outlet
pin must be accessible after installation.
Connect to individual branch circuit.
10