User Manual - Jaz audio TEJZARMONYBTK Manual De Instrucciones

UK
INSTRUCTION MANUAL
Specifications:
The TEJZARMONY headset can be used either connected to
BLUETOOTH®, or with the 3.5 mm AUX cable (included). If the
rechargeable battery is out of charge, this allows switching to the
wired connection without interrupting listening. This feature also
makes the headset perfect for listening to music on long flights or
when it is not permitted to use the Bluetooth® connection.
Charging the headset
Before use, fully charge the battery by inserting the MicroUSB
connector of the charging cable into the MicroUSB port of the headset,
and the USB connector into a wall charger or a PC port. The red LED
confirms the start of charging; the blue LED indicates full charge.
Using with cable:
Using the cable with 3.5 mm mini-jack and
2 mm double mini-jack, connect the headset
to the two smallest connectors (1):
the headset will thus be ready for use
as a normal pair of wired earphones.
1
Use with Bluetooth®:
To use the earphones with Bluetooth® they should be connected to
the shortest cable – the one with the three buttons (+, - , ) and the
MicroUSB socket for charging.
Powering on and pairing:
when the device is off, press the button ( ) for about 4 seconds until
the LED flashes blue and red, and you hear a confirmation sound.
Simultaneously, pairing mode will be activated. To complete pairing
with your smartphone, activate Bluetooth and select JAZ ARMONY
from the list of devices found. If prompted, enter your Bluetooth PIN
0000 (4 zeros) to pair and connect your headset to your mobile phone.
Pairing with two devices simultaneously (Multipoint function)
Perform the previous step to connect the headset to device 1, then
turn off Bluetooth on device 1. Perform the same procedure on device
2, connecting the headset. Re-enable Bluetooth on device 1. The
headset will connect to devices 1 and 2 at the same time.
4