Tools Needed - Stanley ST-80T-KFA Manual De Instrucciones

ENGLISH
WHAT'S IN THE BOX (80T-KFA)
Cord Wraps (Optional)
10 mm Screws (2)
WHAT'S IN THE BOX (140T-KFA / 215T-KFA)
50 mm Screws (4)
Ax
le Nuts (2)
Heater (1)
- Remove the heater and all packaging materials
from the shipping carton

Tools Needed:

- Phillips Head Screw Driver
- 8 mm open-end wrench
- 19 mm open-end wrench
NOTE: Save the box and packaging materials for future storage.
3
NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR WHILE CONNECTED TO A POWER SOURCE
Carry Handle (1)
15 mm Screws (2)
30 mm Screws (4)
Spacers (2)
Kerosene Foreced Air Heater (ST-80T-KFA/ST-140T-KFA/ST-215T-KFA)
Shown With Optional Cord Wraps
8 mm Nuts (8)
Wheels (2)
Front Handle
Wheel Support
Frame
TIP: Be sure to remove the axle from the side of the
styrofoam packaging.
TIP: Use a power screwdriver and locking wrench for
easier assembly.
Heater (1)
Rear Handle
Axle