Würth PinPuller Spot Traducción Del Manual De Instrucciones De Servicio Original página 17

Maintenance
WARNING !
Danger due to electric shock
Prior to any work on the appliance,
¾
pull out the mains plug.
▸
Keep the plug and connections clean. If neces-
sary, remove the oxidation residues with fine
sandpaper.
Accessories and spare parts
If. in spite of careful manufacturing and testing
processes, the device becomes faulty, a repair by
Würth masterService should be arranged.
With any enquiries or spare parts orders, always
quote the article number as given on the name plate.
The latest spare parts list for the device is available
online at http://www.wuerth.com/partsmanager.
Alternatively, contact your local Würth agency for a
hardcopy.
Warranty
We provide a warranty for this Würth device from
the date of purchase and in accordance with the
legal/country-specific regulations (proof of purchase
through invoice or delivery note). Damage that has
occurred will be corrected either by replacement or
by repair. Damage caused by improper handling is
not covered by the warranty. Claims under warranty
can only be accepted if the device is returned fully
assembled to a Würth agency, your Würth sales
representative or an authorised Würth customer
service workshop. We reserve the right to make
technical changes. We accept no liability for print-
ing errors.
Disposal
Do not dispose of your electrical
power tool in household waste.
According to European Directive
2012/19/EC on waste electrical and
electronic equipment and its implemen-
tation in national law, broken and unserviceable
electric power tools must be collected separately
and submitted to an environmentally sound recycling
facility.
EC Declaration of Conformity
We herewith declare that this product conforms to
the following standards and directives:
Standards
• EN 62135-1:2015
• EN 62135-2:2015
in accordance with the regulations stipulated in the
directives:
EC Directive
• 2014/35/EU
• 2014/30/EU
Technical documentation with:
Adolf Würth GmbH & Co. KG,
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, GERMANY
M. Strobel
Head of Product Manage-
ment
Künzelsau: 29.01.2016
Dr.-Ing. S. Beichter
Head of Quality, Author-
ized Signatory
17