Basic Operation - DeFelsko PosiTector IRT Manual De Instrucciones

The PosiTector IRT powers-up when the center navigation button
is pressed. Readings are updated automatically each second.
To preserve battery life, the instrument powers down after
approximately 5 minutes of no activity. All settings are retained.
1.Remove the protective rubber cap from the probe.
2.Power-up Gage by pressing the center navigation
The infrared temperature sensor immediately begins measuring.
Press the (+) button to pause the measurement. Press (+) again to
resume.
Surface
Temperature
Battery Indicator
Introduction
Introduction

Basic Operation

Basic Operation
Typical Display
1
button.
Emissivity (pg.5)
SmartTrend Indicator -
Appears when surface
temperature is rising or
falling. Does not appear
when measurement is
stable.
Temperature Unit