Tools Needed - Haiku Light Kit Guia De Instalacion

Disconnect power to the fan location before installing the fan and light kit!
!
If required by your local electrical code, a licensed electrician must install the fan and light kit.
!
Be careful not to damage the LEDs, the electronics on the light module, or the electronics on the
!
bottom of the fan during installation.
Parts and hardware
(4) #6 x 1/2" Screws†
† Shown at actual size.
††
Install the white lens for maximum light emission. Install the smoky lens for dimmer light emission. If installing the smoky lens, remove the lens trim from the white lens and snap it
into the center of the smoky lens.

Tools Needed

• Ladder
• Phillips Screwdriver
Box Contents
As you remove the fan from its packaging, make sure you are not missing any components required for
assembly and operation. If you ordered multiple fans, be sure to keep the components of each fan together!
2
White Lens and Trim†† Smoky Lens††
REV. B
●
Light Module
© 2015 HAIKU HOME. ALL RIGHTS RESERVED.