Care And Maintenance - THOMSON DS401 Manual Del Usuario

b) Press Standby button, and press the function once into the Bluetooth mode
c) Switch on your cell phone's Bluetooth function and search for Bluetooth devices. After the
search is completed, select "DS401' ' " from the Bluetooth device list.
d) According to indication, enter password or PIN No: "0000" and press "Yes" or "confirm".
e) After successful pairing, select "DS401" from the Bluetooth device list and press "connect".
B. Pairing with a Bluetooth stereo transmitter
Different Bluetooth transmitters have different pairing ways. Please refer to the user manual of
your Bluetooth transmitter for further information. The general pairing steps are as follows:
a) Keep DS401 and Bluetooth transmitter within 1 meter when pairing.
b) Press Standby button, and press the function once into the Bluetooth mode
c) Switch on your Bluetooth transmitter and let it enter pairing mode.
d) The transmitter will search and connect with DS401 automatically. After successful
connecting, the Bluetooth voice will change when connected successfully.
Remarks:
DS401 will return to pairing mode automatically after disconnecting from a Bluetooth device.
C. Music Playback
Connecting with a A2DP cell phone or Bluetooth transmitter
a) Connect your cell phone or Bluetooth transmitter with DS401.
b) You can listen to your music from DS401 now when playing it back.
c) Press Vol+ to turn up the volume, press Vol- to turn down the volume.
d) Press to skip to the previous song and long press to Rewind.
e) Press to skip to the next song and long press to Fast Forward.
Remarks:
If there is an incoming call while DS401 is connected to your cell phone for music playback, it will
pause at once when you answer the call and resume after the call ended. (Sometimes it will
pause after end the call, it depend on your cell phone.)
Notes
Always unplug the appliance when not in use and before cleaning.
Do not play music at excessive volume levels as damage to hearing and/or the equipment may
occur. Do not use this unit in wet or damp conditions.

Care and Maintenance

Always disconnect the unit from the mains power supply before cleaning. Clean the appliance
with a soft, damp, lint free cloth. Do not use abrasives or harsh cleaners.
"Made for iPhone" and "Made for iPod" means that an electronic accessory has been
designed to connect specifically to iPhone or iPod respectively, and has been certified by
the developer to meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory standards. IPhone
and iPod are trademarks of Apple In., Registered in the U.S. And other countries. IPod not
included. Not iPod shuffle compatible.
- 7 -