Procedures To Perform Every 25 Work Hours; Periodic Checks And Replacements - Storti Frasto Tornado 9-11 Manual Empleo Y Mantenimiento

PROCEDURES TO PERFORM EVERY 25 WORK
HOURS
– Grease all components equipped with grease nip-
ples and indicated by the sticker. Also grease the
unloading door guides.
– Check the oil level in the drive reduction unit (B -
Fig. 5). When topping up or replacing oil remove
plug (A - Fig. 5) and then fill as necessary.

PERIODIC CHECKS AND REPLACEMENTS

1) Every month check the tire pressure and refill as necessary to the pressure level indicated on the name-plate.
Check the tightening of hub bolts.
2) Make sure that cutting tools are always in efficient working order.
Note: Always immediately search for the cause whe-
never you notice oil leakage. Make all due
repairs and then top the oil level up to the cor-
rect level.
Fig.5
A
B
106