Monacor PA-1200C Manual Del Usuario página 14

B Selecting the chime
1) After setting the starting time, the display shows:
SET CHIME
ƊCHIME A
2) Either confirm the one-sound chime A with the
button ENTER or select another chime with the
button UP or DOWN .
3) If no chime is to sound at the programmed start-
ing time, select the menu item
with the button DOWN .
4) Define the setting with the button ENTER . The
display changes to:
CHIME=x
<PRESS ENTER>
Press the button ENTER again to confirm the
chime setting . The submenu for the selection of
the weekdays appears .
C Selecting the weekday(s)
1) After the chime selection, the display shows:
SET DAY |1234567
Ɗ1 |
2) Select the weekday with the button UP or
DOWN . = Monday,
1
3) Use the button ENTER to confirm the weekday .
The selected day is marked by an asterisk, e . g .:
SET DAY |1234567
Ɗ3 |
4) If a wrong weekday was selected, press the but-
ton ENTER again to delete it .
5) Several days in any desired combination can be
programmed, e . g .
SET DAY |1234567
Ɗ6 | ** ***
6) After all days have been selected, select the menu
item
ƊEXIT
between and
7
display shows:
SET DAY =xx
<PRESS ENTER>
Press the button ENTER again to confirm the
days . The submenu for the relay selection ap-
pears .
14
a
1
c
d
ƊNONE CHIME
= Sunday .
7
*
with the button UP or DOWN (is
) . Press the button ENTER . The
1
b
2 3
CHIME A CHIME B CHIME C
UP DOWN ENTER
e
D Selecting the relay
1) After the selection of the weekday, the display
shows:
SET REL |123
Ɗ1
2) With the button UP or DOWN, select the relay
which is to be energized at the selected starting
time .
3) Confirm the relay with the button ENTER . The
selected relay is marked by an asterisk, e . g .:
SET REL |123
Ɗ3
4) If a wrong relay was selected, press the button
ENTER again to delete it .
5) No relay at all or relays in any desired combina-
tion can be programmed, e . g .
SET REL |123
Ɗ3
6) After all relays have been selected, select the
menu item
Press the button ENTER . The display shows:
SET REL=xx
<PRESS ENTER>
Press the button ENTER again to confirm the
setting . The submenu for the time delay of the
relay appears .
E Time delay of the relay
If no relay was selected, this menu item is skipped .
The selected relays can be energized at the same
time as the chime or after the chime has faded away .
1) After the relay selection, the display shows:
SET REL DELAY
ƊON
2) Either activate the time delay with the button
UP (display
chime) or deactivate it with the button DOWN
(display
ƊOFF
time as the chime) .
3) Define the setting with the button ENTER . Then
the display shows:
REL DELAY=ON
<PRESS ENTER>
To confirm, press the button ENTER again . The
submenu for the relay status appears .
PA-1200 C CLOCK MODULE
4 5
6
0 10
PROG.
LEVEL
|
| *
|* *
with the button UP or DOWN .
ƊEXIT
; the relay is energized after the
ƊON
; the relay is energized at the same
REL DELAY=OFF
<PRESS ENTER>
or
➃