Publicidad
Idiomas disponibles
Idiomas disponibles
2 tone, 30 W SIREN
User Manual
INSTALLATION
1. Use the base to make drill marks into the surface where you want to
install the device.
2. Make drills. Insert anchors (not included) and screw firmly.
SPECIFICATIONS
Input: 12 V - - - 30 W
Frequency response: 350 to 7 000 Hz 8 Ohms
Specifications may change without previous notice
IMPORTED BY
ELECTRÓNICA STEREN S.A. DE C.V.
Biólogo Maximino Martínez, núm. 3408, col. San Salvador Xochimanca,
Azcapotzalco, Ciudad de México, C.P. 02870, RFC: EST850628-K51
STEREN PRODUCTO EMPACADO S.A. DE C.V.
Autopista México-Querétaro, Km 26.5, sin número, Nave Industrial 3-A, col.
Lomas de Boulevares, Tlalnepantla de Baz, Estado de México, C.P. 54020,
RFC: SPE-941215-H43
En caso de que tu producto presente alguna falla, o si tienes alguna duda o
pregunta, por favor, llama a nuestro Centro de Atención a Clientes, en
donde con gusto te atenderemos en todo lo relacionado con tu producto
Steren.
In case your product fails, or you have questions about your product, please
contact your nearest dealer.
If you are in Mexico, please call our Call Center at 01 800 500 9000
Before to use the product, please read carefully this manual to avoid any
malfunction.
The info in this manual is shown as reference. Due to updates can exist
differences. Consult our website
version of this manual.
• This device is not designed for be using by people (including children) with
physical capacities, sensorial or mental reduced, or they noy have the
necessary experience or knowledge.
• The children should be supervised to ensure that don't use it like a toy.
• Don't install the siren with wet hands.
• Don't use abrasive liquids to clean it.
V1.1/ 0520N
Connect the siren cables in an electronic circuit, ensure that the polarity is
right.
TONE 1
To get tone 1, connect the red wire (+) and white wire (-)
TONE 2
To get tone 2, connect the yellow wire (+) and white wire (-)
www.steren.com
to obtain the current
CAUTIONS
CONNECTION
Publicidad
