Fig. 26
7. Insert the fl ue pipe into the rear outlet.
NB: It is important for the joints/fl ue pipes to be sealed
completely. Air leaks may prevent them from operating
properly.
Product without convection plate
NB: If you will not use a convection plate, the product will have
different setup conditions (see fi g. 1).
Fig. 27
•
If the convection plate is not going to be used, screw the
screws (A) back again after removing the convection plate.
Use the Allen key from the bag of screws.
A
A
4.7 Performance check
Always check the control handles once the product has
been assembled. These should move easily and work in a
satisfactory manner.
Fig. 28
Min.
Maks.
The Jøtul F 105 R is equipped with the following
operating options:
Air vent (A)
Pushed to the left:
Pushed to the middle:
Pushed all the way to the right:
Door handle (B)
Open by pulling the handle out.
Stacking height (C) for wood (the holes may not be covered).
ENGLISH
C
B
Kindling
A
Minimum
Maximum
For kindling
21