Adjustment Of The Loudspeaker Volume; Checking/Replacing Battery Of The Remote Control - Num'axes CANICOM VOICE 800 Guía De Uso

Option n°1: Do this in a very quiet environment.
Do the same manipulation as to save a message, continuously press the message touch N°1 until the LED turns to
fixed purple and hold it down until the LED flashes again to green. Don't talk until the LED flashes again to green.
Option n°2:
Record a new message directly instead of the old one. Press the N°1 button continuously, the led flashes purple
and then fixed purple: you can then save your new message. Your 1st message will be automatically overwritten
and replaced by your new message.
•

Adjustment of the loudspeaker volume

You can adjust the loudspeaker volume on the collar. Keep in mind that the loudspeaker will be placed near your
animal's ears. It is not necessary to adjust the sound volume to the maximum, a dog has much more developed
hearing than man.
Turn it on, then position the remote on the symbol at the back of your collar. The LED then changes to fixed blue
and the sound beeps scroll as long as you leave your remote in contact with the symbol. Remove your remote as
soon as you reach the desired sound volume. Check your choice by listening to one of your messages.
Diagram. 5
Adjustment of the loudspeaker volume
At the back of the collar: location
to adjust the loudspeaker volume.
•

Checking/replacing battery of the remote control

Performance (radio range) of the remote control may deteriorate as battery becomes weak. Be prepared to replace
battery.
To check the condition of the battery, turn on the remote control and look at the battery level indicator on the LCD
screen. The symbols which appear indicate the following:
-
-
-
Remove the old battery and replace it : 1 3V Lithium CR2 battery.
Replace the old battery with a new one as follows:
−
On the back of the remote control, unscrew the screw and remove the battery cover.
−
Remove the old battery.
−
Insert the new battery (3-V CR2 lithium) paying attention to follow polarity indicated on the battery housing
(Diagram 6).
Guide d'utilisation CANICOM Voice 800 – indice A
Approach until coming in contact
these two areas to adjust the
loudspeaker volume.
battery fully charged.
weak battery: prepare to replace the battery.
dead battery : your Canicom Voice 800 switches to safety modeand the system locks
up. The battery muste be replaced.
20/60